How Much Does it Cost to Get Irons Reshafted?

Having properly fit iron shafts is essential for maximizing both performance and enjoyment. But over time swing speeds and preferences evolve.

Suddenly those stock iron shafts you were fit for years ago seem all wrong. Fortunately, reshafting provides a great option for completely changing iron shafts without buying new clubs. But how much does it cost to reshaft a set of irons?

While reshafting pricing depends on certain factors, a full 6-iron set typically runs $150-$300 for steel shafts. Graphite can cost $200-$400 or more. Component options, labor fees, number of clubs, and location influence the exact reshafting expense.

Let’s examine the ins and outs of iron reshafting pricing so you can get the perfect shafts for your game at the best value.

Irons Reshafted

Factors Impacting Iron Reshafting Cost

Several variables impact what you’ll pay to get irons reshafted:

Type of Shaft

Graphite shafts cost significantly more than steel, around $25-$50 more per club. More labor-intensive installation also drives up graphite pricing.

Custom or Stock Shafts

Fully custom shafts with premium components made specifically for you exceed off-the-shelf stock shafts in price. Custom can run $50+ more per club.

Shaft Profile (Step, Taper Tip, Parallel Tip)

Unique complex shaft profiles require additional precision and labor to install properly versus simpler parallel tip shafts. Upcharges apply.

Grip Change Services

Requesting new grips as part of the reshafting adds $8-$15 per iron depending on grip model and labor fees.

Location and Shop Fees

Big metro cities with higher real estate costs get passed along as higher shop fees. Rare niche shaft sources also command premium pricing.

Number of Clubs

Obviously the more clubs you reshaft the higher the total expense. But per club costs do decline with more volume as shops maximize efficiency.

Now that you know the major price-impacting factors, let’s examine typical reshafting costs.

What is the Average Cost to Reshaft a Set of Steel Irons?

For a traditional 6-iron set with parallel tip steel shafts, no grip changes, in a lower cost of living area, typical reshafting pricing runs:

  • 3 iron set – $190 average total ($63 per club)
  • 4 iron set – $210 average total ($53 per club)
  • 5 iron set – $240 average total ($48 per club)
  • 6 iron set – $270 average total ($45 per club)
  • 7 iron set – $300 average total ($43 per club)

So you can budget around $45-$55 per iron for standard steel reshafting. Match your existing setup length and components to minimize complexity upcharges.

What is the Typical Cost to Reshaft Graphite Irons?

Similar 6-iron set refits with parallel tip graphite shafts and standard labor rates average:

  • 3 iron set – $270 average total ($90 per club)
  • 4 iron set – $320 average total ($80 per club)
  • 5 iron set – $375 average total ($75 per club)
  • 6 iron set – $420 average total ($70 per club)
  • 7 iron set – $490 average total ($70 per club)

Graphite incurs a $15-$25 premium per iron over steel to account for shaft expenses and labor. Keep this pricing in mind if debating graphite vs steel.

Cost Savings Tips for Iron Reshafting

To make iron reshafting more affordable, ask about these potential ways to save:

  • Buy stock shafts in bulk online to provide to the shop yourself
  • Specify parallel tip to avoid complicated taper tip installations
  • Scope eBay, Facebook groups, and classifieds for used shafts in new condition
  • Use lighter-weight steel shafts to minimize labor time and difficulty
  • Request minimal adjustments to existing lie angles, lengths, and grips
  • See if fitting shops offer discounts for doing full-bag fittings plus reshafting

While still an investment, smart preparation reduces re-shafting costs.

Cost to Get Irons Reshafted

Should You Reshaft Irons Yourself?

Some handy golfers ponder doing DIY iron reshafting themselves to save on labor. This is feasible but challenging.

Pros

  • Not paying any shop install fees
  • Satisfaction of doing it yourself

Cons

  • Requires $200+ investment in proper epoxy shafts and vise
  • No training or experience inevitably leads to some mistakes
  • Trial-and-error mistakes damage components
  • Botched shafts play poorly diminishing clubs value

Leaving reshafting to the experts avoids frustration and equipment damage that negates any DIY savings.

Weighing Iron Reshafting vs New Clubs

Before pursuing reshafting, weigh the expense against buying new irons specifically fit for your current needs.

Some break-even analysis tips:

  • Estimate the remaining usable life of current iron heads
  • Calculate total reshafting costs for your set
  • Research new iron models offering the performance you need
  • Gauge how often you upgrade irons on average

Crunch the numbers against your gear cycles. If due for new irons within 12-18 months anyway, reshafting existing clubs you’ll soon replace becomes questionable.

Maximizing the Iron Reshafting Investment

To protect your reshafting investment, be sure to:

  • Start with high-quality, well-cared-for iron heads in good shape
  • Select premium shafts from leading brands like KBS, Project X, Nippon, etc. rather than bargain shafts
  • Use authorized dealers for major shaft brands to ensure authenticity
  • Seek out master fitters certified by the OEM to ensure quality workmanship
  • Confirm warranty protection on shafts and labor

While not cheap, proper iron reshafting breathes new life into your clubs. Taking the time to understand costs, optimize pricing, and vet quality allows reshafting to deliver a true performance payoff.

Conclusion

The average price to reshaft a standard 6-iron set with steel shafts runs $250-$300, while graphite is closer to $400-$500. Exact pricing depends on custom versus stock shafts, grip changes, location, quantity of clubs, and several other variables.

With some diligence and cost-saving techniques, reshafting becomes an economical way to fully optimize your iron performance, especially compared to buying brand-new irons. Just ensure any reshafting work meets quality and authenticity standards. With the right shafts finally in place, your best iron play is ready to shine through.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *